A GUIDE TO OUR ICONS

Hard Yakka outsoles are tough, oil & grease-resistant, and durable. The PU midsole provides additional comfort and energy rebound. Heat resistant to 300°C.

TPU outsoles are elastic and resistant to oil, grease and abrasion. The PU midsole provides additional comfort and energy rebound. Heat resistant to 130°C.

Anti-penetration & non-metallic plate. High-tech ceramic coated fibres offer greater comfort, lightness, thermal insulating properties, and flexibility over steel plates. Tested & compliant with EN ISO 20345:2011.

Outsole resistant to fuel oil.

Compliant with EN test for slip resistance to SRC.

Compliant with EN test for slip resistance to SRA.

50% Lighter than steel toe caps, non-metallic, non-magnetic, non-conductive and anti-corrosive. Lightweight construction decreases foot fatigue. Compliant with EN ISO 20345:2011.

Impact & compression resistant 200 joule toe cap. Compliant with EN ISO 20345:2011.

Up to 50% lighter than steel and 40% lighter than composite toe caps. Our Nano Cap technology makes our work boots more lightweight, comfortable and stronger while maintaining EU safety standards.

Added toe protection which helps to increase strength and abrasion resistance.

Sensitive to pressure and moulds perfectly to your unique foot shape for personalised comfort. The PU bottom layer provides permanent cushioning and shock absorption.

Reduces the build up of excess static electricity by conducting body charge to the ground. This offers a level of protection against ignition hazards such as flammable materials and gases.

Repels water so that it soaks in more slowly and are best used when walking through dew or occasionally damp areas.

Utilising responsible environmentally friendly practices within product lifecycle management.

Acts as a shock absorber to reduce foot fatigue and provides energy rebound with every step. Essential for those covering high mileage on hard surfaces.

Non-metallic construction allows you to move through security environments without triggering metal detectors. The entire boot is metal free which can be x-rayed, will not rust or transmit electricity.

Lightweight construction to help reduce foot and leg fatigue.

Beacon Mesh Reflective Technology for enhanced visibility in low light conditions.

Built to a genuine women's fit.

The world's trusted manufacturer of recycled polyester fibre, made from 100% certified post-consumer recycled plastic bottles.

Cordura reinforcement delivers unmatched protection against tears, abrasion and scuffs for ultimate toughness.

Warm & lightweight insulation that traps & holds body heat, while allowing moisture to escape. Using 78% recycled polyester from post-consumer waste, giving a new life to resources that might otherwise end up in landfills.

3x the abrasive resistance of base fabric for reinforced durability.

Ripstop fabric have been woven to be highly tear and rip resistant.

For ultimate comfort by allowing for a full range of movement.

Assists with the reinforcement of the garmet in stress points to make it extra tough and durable.

Tried and tested by end user.

Stitching seams with waterproof fabric to prevent leaking when raining and maximise waterproof capabilities.

Waterproof 10,000mm H₂O. Seam sealed waterproof fabrics that withstand most downpours and heavy snow.

Garments constructed using highly water resistant fabrics measuring water resistance under pressure in millimetres (mm).

Durable water repellent finish sheds water from the garments surface.

Breathable 5,000gm²/ 24hr. The breathability of a fabric relates to its ability to let sweat escape.

A barely-there feel with minimal weight, while trapping in body warmth.

Garments with a 50+ Ultraviolet Protection Factor offers excellent protection from Ultraviolet Radiation transmitted through fabric onto the skin.

Lightweight construction that does not compromise performance.

Utilising responsible environmentally friendly practices within product lifecycle management.